It is water resistant
100mm Kingspan roof insulation is water resistant and suitable for use on flat roofs. It is made of a high-performance, fibre-free rigid thermoset polyisocyanate (PIR) foam board that is designed to achieve the required U-values with minimum thickness. This insulating board features a low Global Warming Potential and is available in a range of thicknesses including 100mm, 120mm and 130mm. Its waterproofing is mechanically fixed so that water cannot penetrate the insulation.
Kingspan and Celotex are two of the leading insulation brands. Their products will differ slightly in size and cost, but you’ll still want to make sure you’re getting the right one for your home. The decision between the two will depend on how much you’re willing to spend on the insulation and which features are important to you.
The next step is to determine how thick you want your insulation to be. Most open-cell products will absorb moisture and compromise the quality of your indoor air. Therefore, it is crucial to choose a product with a high density and water-resistance. Once you’ve decided on your chosen product, you can start measuring. You’ll need a board that’s approximately the same thickness as your existing roof. Once you’ve found the right size, lay the board flat and mark the cutting line. Be careful not to scratch the surface and keep a straight line.
It is unaffected by air infiltration
Kingspan roof insulation is available in many thicknesses, from 20mm to 100mm. The 100mm Kingspan product has a closed cell structure and does not allow air to penetrate. This means it can be used in rooms where the roof does not meet the masonry separating walls. The insulation is also certified to the BES 6001 Excellent standard, which means it is free from air infiltration.
Kingspan insulation boards are manufactured the same way as PIR. The manufacturer applies a blowing agent to wet phenolic foam, which expands as it dries. The next step is to apply a foil facing to the foam. This allows Kingspan to achieve varying thicknesses by laying the foil facing above the foam. Once the foam adheres to the foil facing, it is heat-treated and cut to standard sizes. Kingspan insulation boards are available in 25mm, 50mm, 75mm, and 100mm. The 100mm boards are the most popular, and provide strong thermal conductivity.
Kingspan roof insulation is ideal for pitched warm roof spaces. Its thermal conductivity is 0.022 W/mK. It is also resistant to water vapour and unaffected by air infiltration. Kingspan GreenGuard GG300 roof insulation has excellent thermal performance and meets the current Building Regulations.
KingSpan Kooltherm K107 pitched roof board is made from premium performance fibre-free rigid phenolic insulation. It is rated for unaffected air infiltration and has a low Ozone Depletion Potential. It is ideal for roof insulation and is certified for both energy-efficiency and safety around electrics.
Kingspan is a leading manufacturer of rigid insulation and building envelope systems. Its phenolic insulation achieves thermal conductivities of 0.018 W/mK, making it the most effective thermal protection available. It is also certified to FM Approval Standard 4882.
Kingspan has a number of products that can be installed in a variety of applications. Its PIR (polyisocyanurate insulation) board is commonly used in the construction industry. It has a high R-value and is compatible with most common adhesives and sealants. Kingspan also provides Blue Board for interior and exterior walls. It can increase the effective R-value of a wall by 20%. This product comes with a 90-day guarantee.
It is easy to cut
Kingspan 100mm roof insulation is easy to work with, as it is made from a soft, flexible foam material. When cutting the insulation board, it is helpful to measure the length against the roof rafters and mark the cutting line. Generally, it is better to cut the board larger rather than smaller. Then, lay the board on a flat surface, making sure not to scratch it. To make a clean cut, use a knife or ruler to guide the cutting line.
The Kingspan TP10 100mm roof insulation board is made with a polyisocyanurate (PIR) core and a low emissivity foil facing. It is designed for pitched roof applications but can also be used for walls and floors. It is easy to cut and is ideal for lining walls between battens.
Kingspan is a world-renowned manufacturer of insulation boards. The range of products includes floor, wall, roof, and cavity wall insulation. You can choose from a wide range of board types, each designed for a specific application. Kingspan also offers a range of insulating products, from foam to rigid insulation.
If you’re planning to put in Kingspan Kooltherm, you’ll appreciate its easy-cutting features. It has a low emissivity foil outer face which makes it easy to handle and install. It is suitable for a variety of buildings, from industrial units to residential dwellings.
If you’re a DIY novice, or just want to save yourself some time, you can cut Kingspan 100mm roof insulation easily. Just follow these easy steps. As with any other insulation board, it’s helpful to take the measurements with you when you shop. You can buy insulation from a DIY retailer or online. However, remember that insulating wool is bulky, so you should also consider the delivery service.