When it comes to installing a tile backsplash, there are several different types of tile backer boards available. Some of the most popular options include ThermaSheet, GoBoard, Sunstone, and Ultra Tile Backer Board. Each one has its advantages and disadvantages. Let’s take a look at how to choose the right one for your project. Here are some tips: Before you purchase an insulation board, ensure that it is suitable for your project.
ThermaSheet
ThermaSheet insulating tile backer board is a great way to protect tile and other types of flooring from hot, moist air. It provides a moisture barrier and industry-leading thermal performance. As a result, it is an effective stand-alone alternative to felt paper and other types of traditional underlayments. Its innovative design also reduces the cost and time involved with installation.
ThermaSheet is light in weight and can be easily cut, drilled, or welded into place. A single roll of 500 square feet weighs only 18 pounds. This insulating tile backer board is flexible and seals around fasteners for easy installation. It can also be used as a cool roof alternative.
A tile backer insulation board can greatly enhance the efficiency of your underfloor heating system. Its excellent thermal properties help to reduce heating time by as much as 50%. The improved efficiency will save you money by reducing the cost of running your heating system. With a temperature of up to 300 kPa, this tile backer board can be cut with a fine saw or a Stanley knife.
A ThermaSheet insulating tile backer board is an innovative, cost-effective alternative to traditional cement backers. It is a lightweight, waterproof and thermal-insulating underlayment for ceramic tile. It is made of 100% HCFC-free XPS foam and is available in varying thicknesses and sizes.
This insulating tile backer board can support far more weight than traditional wall surfaces. It can support up to 60kg per board, which is more than double the limit of plaster. This makes it ideal for large tiles. Its high-adhesion properties make it a great choice for plastering and dry-lining. It also makes a great solution for underfloor heating.
GoBoard
One of the best ways to protect a floor or wall from water damage is to install a waterproof tile backer board. GoBoard, a product of Johns Manville, has been engineered to be lightweight and easy to cut. It also comes with built-in waterproofing, so there is no need for additional waterproofing or special tools.
GoBoard is waterproof because of its closed-cell foam core. It will not let water pass through it like cement, and you’ll only have to seal the board’s fasteners and joints. This will minimize itchiness and allow the tiles to breathe.
GoBoard can be installed using galvanized roofing nails or cement board screws. You can space the fasteners every eight inches. The material weighs eight pounds per sheet, making it easier to handle during installation. Unlike cement board, GoBoard is much lighter, so it won’t damage the walls when you move it.
Ditra mat is another great option to use as a tile backer. It is a thin, 1/8-inch-thick polyethylene membrane with an anchoring fleece on the underside. It can be applied using a thin-set adhesive. This creates a waterproof tile backer that also acts as an uncoupling membrane. It can be used to replace tile backer boards in many cases.
A Tile Backer Board is an excellent solution for many tiling projects. It can be used to waterproof a wet room, provide insulation for electric underfloor heating, and create a smooth, even surface for tiling. Its lightweight and rigid construction makes it ideal for use in a variety of locations. It can even fit into awkward corners and curves.
Ultra Tile Backer Board
Insulate tile backer board is a great way to improve the efficiency of an underfloor heating system. It can take up to an hour for a concrete floor to warm up, but with an insulated backer board, it will warm up in just 10 minutes. The faster warm up times help reduce heating bills.
Tile backer board is a lightweight, durable material that has excellent insulating capabilities. It is suitable for walls and floors, and comes in different thicknesses. It is also waterproof, and is especially suitable for under floor heating. The tile backer board is available in varying thicknesses, from 6mm to 50mm.
The DeltaBoard high-density polystyrene construction board is an excellent choice for use as an insulating tile backer board. Its double-sided fibre glass weave provides thermal insulation and exceptional durability. It is highly versatile, and is perfect for use with electric under floor heating. Other alternative construction boards include Wedi board, Marmox, and Hardibacker.
Another benefit of using Tile Backer Board is that it can bear a lot more weight than other wall surfaces. The boards can hold up to 60kg each, which is more than twice the weight capacity of plasterboard. This means that you can use bigger tiles without any problem. Additionally, Tile Backer Board provides a smooth, even surface and is suitable for plastering. As an insulation solution, Tile Backer Board makes it easy to improve the efficiency of underfloor heating in your building.
It’s important to note that when using cement backer board, it’s important to install the board with special screws. The screws should be driven into the board so that they are slightly depressed under the board’s surface. You can also use Durock, manufactured by USG, or HardieBacker, made by James Hardie Industries. These are made from 90 percent Portland cement and sand, and feature a patented additive called MoldBlock. You can also use WonderBoard, which is more flexible than Durock and is more suitable for curved surfaces.
Sunstone
SunStone insulation boards come in various thicknesses and forms. This makes them easy to shape and cut around fixtures. In addition, they can be easily fixed to timber or concrete subfloors. They also help reduce heat loss, increasing heating system efficiency. Once installed, SunStone Insulation boards can be topped with tile.
Insulate tile backer board with Sunstone is the ideal material to use for boarding walls and floors prior to tiling. Its composition consists of extruded polystyrene with a glass-fibre mesh reinforced polymer-modified cement mortar on each side.