Isover pipe insulation is suitable for continuous service temperatures between 230degC and 500degC. The aluminium foil facing should not be subjected to temperatures exceeding 80degC. Its flexibility enables it to be used on a wide range of pipework, including those that are exposed to harsh weather conditions. It is particularly suitable for use on piping with high temperatures and high pressure. In addition to its versatility, Isover pipe insulation can also be used on ductwork and pipes in which constant service temperatures are expected.
Snap on pipe insulation
Snap on pipe insulation is a preformed, rigid, glasswool-reinforced insulation material that is flexible enough to fit around pipes. It comes in a single longitudinal slit that opens to encompass the pipe, snaps closed, and is available in plain, canvas, and reinforced foil. It is suitable for use in hot and cold service piping systems, such as chillers, refrigerant lines, and hot water and steam lines. In addition to these applications, Snap on pipe insulation is suitable for domestic and commercial buildings alike.
The insulator is then fitted into a fitting. The insulator is then wrapped around the pipe. Once in place, the fittings are ready for use. The insulator is then wrapped in the covering sheet 21. A single insulating unit is able to cover a length of up to 20 feet of pipe. The insulator can then be installed to meet all the needs of your home. You can also add an additional layer of pipe insulation by following the instructions on the package.
PE pipe insulation is another alternative. Its unique design makes it quick and easy to install. It does not shrink or expand with temperature changes and is inexpensive. PE pipe insulation products are also highly effective in preventing freezing. These products keep hot pipes hot while cold pipes cold. They are available in commercial and retail hardware stores. These products will save you money and prevent leaks in your pipes. They will keep you warm and dry while saving you money on energy bills.
Climpipe
ISOVER CLIMPIPE is a lightweight, flexible, mechanically strong pipe insulation solution that offers excellent thermal, acoustic, and vibration insulation. Climpipe is available in lengths of 1.2m and is made of 70 percent recycled glass and is easy to install. Its patented design reduces noise emissions from soil and wastewater pipes. Climpipe is also eco-friendly, as it is made with up to 70% recycled glass.
ISOVER CLIMPIPE section Alu2 meets all relevant national Building Regulations, local and other applicable standards. Moreover, it is compliant with fire and smoke-resistance requirements. Its patented construction makes it easy to handle and install. It can also be used in applications requiring compression resistance. The Climpipe isover pipe insulation is available in various sizes, including custom sizes. It is available in a wide range of configurations to suit all applications.
Alu2
ISOVER has developed an exclusive fire and thermal pipe insulation solution for the U Protect Pipe Section Alu2. ULTIMATE mineral wool and highly resistant polypropylene are used for the insulating layers of this product. This product comes in different variants, and the photo gallery presents a table indicating all the variants. The advantages of using ISOVER pipe insulation are numerous and are presented below. Moreover, it complies with national and local standards and regulations regarding fire and other safety aspects.
Isover CLIMPIPE Section Alu2 mineral wool pipe insulation is lightweight and provides excellent thermal and acoustic insulation. Its reinforced aluminium foil facing and self-adhesive overlap minimise thermal bridging and provide consistent performance along the length of the pipe. For better performance, CLIMCOVER CR Alu2 pipe insulation is ideally suited for applications requiring a higher level of mechanical performance.
Foil faced pipe insulation
Isover pipe insulation is available in a variety of thicknesses, including preformed foil-faced mineral wool snap-on sections. This pipe insulation is ideal for HVAC, air conditioning, and industrial applications. Its flexibility makes it easy to handle, while its aluminium foil facing creates an inherent vapour barrier. It is also available in CLIMCOVER Roll Alu2, a cost-effective solution with improved mechanical performance.
Isover pipe insulation is made from non-combustible mineral wool with special additives that repel water. It is then covered with a self-adhesive, factory-applied reinforced aluminium foil covering. This gives it a high-performance vapour control finish and effective vapour control. Isover pipe insulation has a Euroclass A2 fire rating, and its material contains up to 80% recycled glass.
CLIMPIPE Section Alu2 provides thermal and acoustic pipe insulation. It is a strong snap-on section with a reinforced aluminium foil facing. Its self-adhesive foil facing prevents air from escaping, and its 1.2-metre lengths make it convenient to use. It also offers the benefit of fewer joints than competing products. It offers superior compressive resistance and consistent thermal performance over the entire length of the pipe.
ISOVER TECH
ISOVER TECH pipe insulation provides an efficient and lightweight alternative to conventional industrial processes pipeline insulation. Available in standard pipe diameters of 15mm to 356mm, ULTIMATE(tm) U Tech pipes have a pre-slit to facilitate fitting over pipes. ULTIMATE pipe insulation offers exceptional thermal performance and is fire-rated to 660 deg C. For the highest thermal performance, ISOVER TECH pipe insulation is available in U-Tech sections, which are highly compressible and lightweight.
KIMMCO-ISOVER mineral wool pipe insulation provides outstanding thermal performance, fire resistance and noise reduction. Its benefical length of 1.2 metres makes it an excellent choice for use in industrial settings. High fire-safety performance is also guaranteed as ISOVER TECH products are non-combustible A1 (EN 13501). Available in low-cloride and reinforced aluminium faced varieties, these pipe insulation options reduce condensation under insulation.
ISOVER CLIMPIPE Section Alu2 Mineral Wool pipe insulation offers superior thermal and acoustic insulation. This insulated pipe has a lightweight, reinforced aluminium foil facing. Various thicknesses are available, making it ideal for most applications. It can also be easily cut to size. With its 1.2M lengths, ISOVER CLIMPIPE pipe insulation offers excellent soundproofing for noisy pipes.
ULTIMATE(tm) U Tech
Ultra-efficient, fast and flexible solutions for process pipelines can be found with ULTIMATE(tm) U TECH PipeSectionMat (PSM) products. They can withstand temperatures up to 620 degC and are suitable for use on large diameter process pipelines. In addition, their glass woven fabric facing offers improved mechanical resistance. And, because they are non-combustible and recyclable, they are a sustainable option for high-temperature pipelines.
ULTIMATE(tm) pipe insulation is the next generation mineral wool that integrates the benefits of conventional thermal, acoustic, and fire classification technologies. Its PSM MT 7.0 G1 pipe insulation offers an efficient solution for large industrial pipes and achieves the highest levels of thermal performance. It is fire-rated, too. You can rely on its high R-values and exceptional durability to protect your pipes from corrosion and extreme temperatures.