Underfloor heating insulation is an excellent way to improve the overall warmth of a home. Whether it is a new installation or an old property with leaks, adding floor insulation can reduce heating costs and increase comfort levels. Choosing the right type of underfloor insulation for your property will help your underfloor heating system warm up faster and use less energy to heat your home.
XPS insulation
XPS underfloor heating insulation is a lightweight and highly thermally efficient panel that can be used to insulate underfloor heating systems. The panels are fabricated in such a way that they are suitable for direct bonding with tile. The insulation can also be applied to engineered wood floors and carpet with additional preparation.
XPS placa has been tested and approved by relevant government agencies and is environmentally friendly. It is produced with low-emission raw materials and does not contribute to any industrial pollution. It is also highly resistant to temperature changes. As a result, it is a green building material. Its superior properties make it a popular choice for many building projects.
XPS underfloor heating insulation is an extremely cost-effective way to insulate underfloor heating systems. The material has excellent insulating properties and is suitable for use on both wooden and concrete sub floors. Because it is lightweight and high-efficient, it is an excellent choice for a poorly insulated floor. As a result, XPS underfloor heating insulation can improve the efficiency of the system and reduce your heating bill.
XPS insulation is made from polystyrene beads which are fed into an extruder. This creates a smooth surface on both sides of the insulation board. The process also produces closed cell structure which effectively inhibits heat conduction. Furthermore, the board is very lightweight and corrosion resistant.
XPS underfloor heating insulation is a great solution for cold and wet climates. The material provides exceptional thermal performance and is suitable for electric matting and water underfloor heating systems. Its high compression strength makes it an ideal choice for subfloor heating systems.
F-Board
F-Board underfloor heating insulation is a great way to increase the heat resistance of your home. You can install it in two different thicknesses to suit your home. The thickest board is 6mm, while the thinnest is 3mm. Each board will cover 0.72m2 in area, and you can divide this area by two to determine the appropriate number of boards.
Another type of underfloor heating insulation is WarmlyYours CeraZorb. This odorless, highly insulating synthetic cork underlayment is 25 times lighter than a standard 1/4-inch backer board. It should be installed over the subfloor and beneath the heating element. This underfloor heating insulation is available in several thicknesses, including a lightweight, durable option.
Compared to traditional heating systems, WIBs improve floor heating efficiency and heating time. For example, in one test, a Warmup mat over a WIB reaches 80F in 64 minutes, whereas the traditional system took five hours to reach the same temperature. It is worth noting that the cost of a WIB and the installation time will vary depending on the cost of electricity and the price of the insulation boards.
Timber suspended floors will also improve heat output. These floors can also be screeded, which will help them conduct heat more effectively. The air gap between the floor boards and insulation should be filled with a lightweight screed mix. The mix should be 25 mm thick and contain 10-1 sand/cement.
CeraZorb
CeraZorb underfloor heating insulation is a lightweight synthetic cork underlayment that’s designed for installation under floor heating systems. It’s 25 times lighter than standard 1/4-inch backer boards and is designed to provide excellent insulation properties while also offering acoustical and crack suppression benefits. Its lightweight construction and low-maintenance properties make it a good choice for a variety of applications.
Another notable feature of CeraZorb underfloor heating insulation is its single material composition. Unlike traditional underlays, it has a bone-shaped structure that improves heating system performance and energy efficiency. This insulating underlayment is also durable and flexible, which makes it easy to install.
In addition to its thermal properties, F-Board underfloor heating insulation is designed for use as a supplementary layer underneath electric floor heating systems. It has a 0.5-mm cement coating that prevents heat from escaping through the floor surface. It also provides a smooth surface for levelling compounds, plaster, or tile adhesive. This type of underfloor heating insulation is ideal for homes that are looking to reduce their energy bills, while also preventing heat loss from the floor.
Marmox Multiboard
Marmox Multiboard underfloor heating is a flexible underfloor heating system that can be laid on timber or concrete floors. To apply the Multiboard, create a thick bed of cement-based flexible tile adhesive and apply it firmly to the floor. Then, lay the heating element over it. Once the heating element is in place, use a flexible tile adhesive to cover the heating element. The installation process is quick and simple. This system is ideal for underfloor heating as it provides both waterproofing and insulation in one operation.
Marmox Multiboard underfloor heating is a great option for homes that require underfloor heating. It can be tiled over, making it extremely versatile. It is available in ten-, four and six-mm thicknesses. The textured concrete backer board provides a sturdy surface for laying tiles or plastering.
Underfloor heating insulation systems are popular because they provide even distribution of heat throughout a room. Marmox Multiboard underfloor heating insulation boards are easy to install and handle, and they are CFC and asbestos-free. Underfloor heating insulation systems can reduce running costs by up to 50% and improve heat-up times. They also function as a tile backer, making them particularly useful in bathrooms.
To install Marmox Multiboard, follow these easy steps. First, prepare the wall. If there are any cracks or holes in the wall, you can apply Marmox Multibond to fill in the gaps. Make sure to use a primer that contains 1 part PVA and four parts water. Once it is dry, you can use tile adhesive to adhere it to the walls.
Multiboard underfloor heating insulation boards are a great option for reducing your power bills and increasing your energy efficiency. They also provide waterproofing and reduce echo noise in large tiled areas. They can reduce sound by up to 20 decibels. The boards are also ideal for swimming pools and wet rooms.
Recticel Eurothane GP
Recticel Insulation is a leader in thermal insulation solutions. Its products are used in both building renovations and new construction. Its high-quality thermal insulation boards meet the demands of building occupants for comfort and energy savings. Recticel Eurothane GP insulation boards are available in several colours, and are suitable for use in underfloor heating systems.
Recticel Eurothane GP Underfloor Insulation meets the NHBC’s requirements for insulation. It is manufactured from a rigid polyisocyanurate foam board with a composite foil facing on both sides. It is suitable for use on concrete and suspended concrete floors and reduces thermal transmittance.
Recticel Eurothane GP insulation boards can be used with wet or electrical underfloor heating systems. Due to their lightweight and easy installation, they are popular among professional installers. Installers can easily cut them to size and ensure the best insulation coverage. Recticel Insulation Products adhere to strict quality control standards and are registered with Lloyd’s Register Quality Assurance.