If you are planning to install rubber pipe insulation in your home, make sure you buy a non-polar and non-porous type. EPDM, closed-cell elastomeric pipe insulation, is a non-polar material. K-FLEX INSUL-TUBE and INSUL-LOCK DS are two examples of flexible and non-porous elastomeric pipe insulation.
Aerocel(r) EPDM closed-cell elastomeric pipe insulation is non-polar
Aerocel EPDM closed-cell elastomer pipe insulation is a non-polar, non-conductive, and environmentally friendly insulation material. It can effectively insulate all types of plastic piping. Additionally, it is low-VOC and has a natural microbial resistance. It also passes ASTM E84 Flame Spread Index 25/50.
Another benefit of Aerocel EPDM pipe insulation is its natural resistance to moisture. It does not react to moisture and passes ASTM C 692 as non-corrosive, making it safe to use for insulating austenitic stainless steel piping systems. It also meets the USDA ‘unexposed’ requirement for piping insulation. Moreover, it can be solvent-welded using a welding adhesive recommended by the manufacturer.
Aeroflex pipe insulation is available in a wide range of wall thicknesses, including 9mm to 63mm. It also offers excellent thermal resistance and a high UV rating. The insulation can be split to fit existing lines, and it can also be applied directly to existing joints. The adhesive chemically bonds the insulation to the existing pipe, creating a strong, permanent vapour seal. Aeroflex pipe insulation can also be used for high-temperature applications, and it has a maximum service temperature of 150 degC. In addition, it is suitable for solar applications, as it has a resistance to moisture and air-borne pollutants.
Closed-cell elastomeric foam pipe insulation has a 70-year track record of thermal insulating performance in the U.S. Its flexible closed-cell structure and built-in vapor retarder make it an excellent choice for chilled water and refrigeration systems, as well as domestic cold/hot water systems.
K-FLEX INSUL-TUBE is flexible
K-FLEX INSUL-TUBES are flexible, closed-cell elastomeric tubes backed by NBR/PVC foam insulation. They are an excellent choice for cold-weather insulation because they’re flexible and prevent condensation and frost buildup. The material is manufactured to exact tolerances and is available in a variety of sizes and wall thicknesses.
K-FLEX INSUL-TUBES can be used in both hot and cold temperatures. With their closed-cell structure, they provide a superior insulating capacity and are highly resistant to moisture and ultraviolet rays. They’re also designed to be flexible in cold weather and are compatible with heat tapes.
K-FLEX INSUL-LOCK DS is non-porous
The K-FLEX INSUL-Lock DS is a versatile, non-porous rubber pipe insulation that provides excellent thermal and acoustic performance. The product is designed for professional contractors for applications where moisture vapor and condensation is a problem. Its skin surface is highly durable and its manufacturing tolerances are precise to ensure long-term performance.
K-FLEX LS SHEET insulation is CFC-free and is available in rolls and flat sheets. It resists mold growth and is non-porous. The product has a registered antimicrobial agent and is UL GREENGUARD Gold certified.
This product has a factory-applied pressure-sensitive adhesive and is one eighth of an inch thick. It is typically used to wrap pipe fittings. However, it can also be used to insulate short runs of piping. The K-FLEX 320/620 rubber adhesive is used to bind two sections of elastomeric pipe insulation together.
K-FLEX INSUL-LOCK DS is non-fibrous
Non-fibrous rubber pipe insulation is a highly effective solution for protecting water pipes against moisture and preventing condensation. K-FLEX INSUL-Lock DS is a flexible, closed cell elastomeric pipe insulation tube that is pre-slit with pressure-sensitive adhesive and pre-coated with an acrylic adhesive to ensure a durable seal.
K-FLEX INSUL-Lock DS prevents moisture from penetrating through its skin, preventing condensation on cold and hot equipment. This pipe insulation is flexible and easy to install and has an EPA-approved antimicrobial agent.
K-FLEX INSUL-LOCK DS is non-fungal
K-FLEX INSUL-Lock DS is a closed-cell foam insulation made from NBR/PVC. It has exceptional heat and moisture-retardant properties. It is ideal for use in cold and hot water plumbing systems. It also prevents frost and condensation on industrial process lines. K-FLEX INSUL-LOCK DS is non-fungal and free of CFCs, PBDEs, and formaldehyde.
K-FLEX INSUL-Lock DS pipe insulation is a pre-slit, closed-cell elastomeric foam with an antimicrobial agent and pressure-sensitive adhesive. It can be used in cold and hot water plumbing systems, and is also ideal for solar thermal applications.
This brand sells several different types of pipe insulation. In addition to pipe insulation, it also makes industrial rubber tubing and covers. It also sells weatherproof pipe coverings and plumbing pipe fittings. It is produced by THE BHAKTIVEDANTA BOOK TRUST and is backed by a reputable supplier.
K-FLEX INSUL-Lock DS is a non-fungal rubber pipe insulation with a non-fungal adhesive. It is used for piping with service temperatures between -40degF and +220degF. It can also be used as an internal liner in ductwork.
K-FLEX INSUL-LOCK DS is mold resistant
K-Flex Insul-Lock DS is a moisture-resistant, low-VOC insulating material that meets indoor air quality requirements. The material retards heat flow and prevents condensation from building materials such as refrigerant lines and cold water pipes. It is recommended for use in cold climates and is compatible with heat tapes for added protection.
INSUL-LOCK DS has excellent acoustic, thermal, and self-sealing properties. This product is manufactured with exact manufacturing tolerances and features a durable skin surface. Mold-resistant K-FLEX INSUL-Lock DS pipe insulation is cold-weather-flexible, reusable, and mold-resistant.
K-FLEX INSUL-Lock DS is a CFC-free, flexible, pre-slit elastomeric pipe insulation. It is black in color, a 1/2-inch-thick pipe insulation that is resistant to rot and mildew. Its high-tech material has an EPA-registered antimicrobial agent that inhibits the growth of mold.
Mold-resistant K-FLEX INSUL-Lock DS is 6.0-feet in length and has an antimicrobial agent approved by the Environmental Protection Agency. It is available in rolls and flat sheets with a length of 48 inches. It is CFC-free and has an EPA-approved antimicrobial agent. It is certified by the GREENGUARD® program under the Children and Schools category. It is also Factory Mutual Research Corporation approved.