Radiator foil insulation is a common way to reduce the heat loss from a domestic heating radiator. It is a thin sheet of foil applied to the wall behind the domestic heating radiator and spaced closely away from it. It works by reflecting the heat away from the wall. This way, the temperature of the room will be maintained and the radiator will not cause excessive heat loss.
SuperFOIL Heat Reflector
The SuperFOIL Heat Reflector radiator foil insulation is a low-cost and easy-to-install solution for reducing heat loss and household energy bills. It works by reflecting more than 95% of radiant energy away from the wall and back into the living space. The RadPack is designed to fit any size radiator and can be fitted in minutes without the need to remove the existing radiator.
To install the SuperFOIL Heat Reflector radiator foil insulation, follow these instructions: Measure and cut the foil insulation to fit the radiator. The length of the foil should be the same as the distance between radiator brackets. Once it fits, remove the radiator covers and install the foil insulation. Use self-adhesive tape to stick the foil to the wall.
The SuperFOIL Heat Reflector radiator foil insulation is a 5m long by 60cm square of bubble-like insulation that effectively reduces heat loss from your radiator. It is 3mm thick and self-adhesive. It is easy to install and doesn’t leave any mess. In addition, the RadPack comes with self-adhesive pads, which make it a hassle-free process.
The SuperFOIL Heat Reflector radiator foil insulation is 95% effective at reflecting radiant energy. Its air space-enhancing effect will enhance its conduction and convection performance. It can be used on any radiator.
Therma-Foil
Installing Therma-Foil radiator insulation is easy. You simply adhere it to the wall using heavy-duty adhesive or double-sided tape. Standard wallpaper adhesive will also work. Once you’ve placed it in place, it’s ready to be used.
Radiator insulation made from Therma-Foil is highly effective in reducing heat loss and heating bills. Its thin, flexible profile helps to reduce thermal bridging and increases the performance of your radiator. Therma-Foil radiator insulation is available in rolls larger than a single sheet for home use. If you’re installing it for a commercial building, it can be cut to the right length.
Another method of reducing energy loss is to install radiator reflectors. Radiators emit heat into the room, but most of this heat is lost through the wall. In fact, over 50% of radiator heat is directed into the wall. Because heat always travels from a warm place to a cold one, using reflective foil insulation can help reflect this heat back into the room. This can increase the temperature output of your radiator by up to 5 degrees C!
Bubble insulation
If you have a gas or electric radiator, bubble insulation can help to prevent the heat loss through the radiator. Bubble insulation can be applied to the radiator by using a special foil. It is a thin sheet of plastic that is designed to provide thermal protection. This foil is usually applied flush with the wall and is secured with double sided tape, Velcro strips, spray adhesive or staples.
Bubble foil is typically 3/8″ thick and has a R-value of 1.0 or 1.1. This type of insulation has a higher cost per square foot than rigid foam, which has a higher R-value of up to five. In the lab, bubble foil does not achieve an air-tight seal, so the bubbles are not able to maintain a perfect seal.
Depending on your needs, you can choose between single or double bubble insulation. Single and double-bubble versions are equally effective. The former has one bubble sheet sandwiched between two external layers, while double-bubble varieties have two layers. Both types offer a thermal break and vapor-retarding effect.
Another type of bubble insulation is made of polyethylene bubbles, which are light and easy to handle. They also do not break in the wind. They are ideally suited for use in lofts, underneath floorboards, between wall cavities, boats, and motorhomes. The material has air bubbles that provide insulation against heat loss and are resistant to moisture, water, and corrosion.
Tin foil
If you’re looking for a cheap way to insulate your radiator, try using tin radiator foil insulation. It’s a good insulator, but it also serves another function: as a reflector. You can stick it to cardboard or foam board, which has insulating properties.
This foil can help save you 20 to 50 pounds a year by reflecting the heat away from the radiator. Tin radiator foil can be bought in the high street. Alternatively, you can buy specialist foil that will reflect the heat back into the room. The difference between the two is that the specialist foil works better on the external walls of the house.
Homemade foil is not as effective. It is only effective if the room does not have a cavity wall, and it will lose its reflective qualities over time. It will also need replacing every few years. If you’re looking for a permanent solution, you can buy pre-made panels. They cost less upfront and require less effort.
Reflectix(r) radiator foil insulation is a great choice for insulating your radiator. Its thin profile helps you save on heating bills by reflecting heat back into the room. Unlike mineral wool, it is breathable and flexible, which helps keep the room warmer, thus reducing your heating costs. And since it is so thin, you can easily cut it to size.
Tape
If you have a leaky radiator, it’s essential to find the right tape to seal it with. Foil tape is a great way to do this. This material can be found in a wide range of colors and is highly effective in insulating your radiator. It can also be used to protect hot pipes. Foil tape is also effective in dampening vibration and sound.
Many types of duct tape are available, including adhesive made of rubber. However, these aren’t the best choice for high-temperature applications, as they can delaminate from the backing. Additionally, synthetic rubber adhesives often have poor mechanical strength and are prone to aging and UV damage. Foil tape with an acrylic adhesive is a better choice because of its increased durability and longevity. It also offers greater thermal stability than pressure-sensitive tapes.
If you’re installing radiator foil insulation in a home, you’ll want to cut it to fit perfectly. To get the best fit, cut the foil panel to fit behind the radiator, but not so small that it’s not visible. Once you’ve cut the panel to fit, you can secure it with the included tape. Another way to secure it is to attach magnetic tape to the backside of the foil.
Radiator foil insulation is a simple and affordable way to improve the overall efficiency of your radiator. It reduces heat loss through the walls and reduces heating bills. Using a reflective foil insulation can even reflect heat back into the room, increasing its output by up to 5 degrees.
Suspension of brackets
Suspension of brackets for radiator insulation is not difficult if you are prepared to use some improvised materials. You can make a simple arrangement of two brackets and install them near the top edge of the radiator. The distance between brackets should be about 15cm (6″) in each direction. A simple rectangular panel should fit between these brackets and have a height of less than the height of the radiator. You can suspend the panel from the brackets using a bamboo kebab skewer or wooden cocktail stick.
If the bottom of the radiator is below the skirting board, you need to make a panel a little shorter. Also, the width depends on whether the panel is to be extended over the brackets or not. The width of the panel should be about 50 to 100mm less than the width of the radiator. Besides, it should also be around 12mm smaller than the width of the bracket.
To attach the brackets to the wall, use a plastic sheeting to protect it from adhesive. The plastic sheeting should extend 50mm below the top of the radiator. Then, attach the foil insulation by sliding it down the reflector. To ensure a good “stick,” use a broom, ruler, or Swiffer mop to press the foil against the wall.