For a more environmentally friendly insulation solution, try Jablite. Its EPS 70 board is 100% recyclable and gives you consistent thermal performance. In addition, Jablite Claymaster prevents clay heave and is easy to cut and install. Whether you’re in the market for a new insulation board or are looking to update an old one, Jablite boards can be an excellent choice. Let us look at some of the benefits of Jablite.
Jablite EPS 100 board provides constant and stable thermal performance
The 50mm Jablite EPS 100 board is lightweight and cost-effective for insulating various constructions. This type of insulation exhibits constant and stable thermal performance under various temperature conditions. The material is created by exposing expanded polystyrene beads to high temperatures. After cooling, the beads solidify into a block material that is then cut to size. This lightweight, cost-effective board is ideal for a variety of applications, including flooring, walkways, and more.
EPS can be a suitable material for floor and wall insulation, and has many advantages. Its smooth surface is easy to work with, and its closed cell structure prevents water from penetrating into the material. This material also has a low environmental impact. This is another advantage of using EPS for building insulation. The Jablite EPS 100 board is an excellent choice for wall and floor insulation, and is available in a variety of colors, patterns, and textures.
The fire-retardant EPS meets flammability regulations. It addresses the spread of fire on the EPS surface. This type of EPS is widely used in the construction industry, and carries a CE mark. It is safe to use and install in protected environments, and carries the CE mark. In addition, it is flame-retardant and meets Class E fire safety requirements. This type of EPS self-extinguishes once the source of the fire has been removed.
EPS products are tested by independent testing laboratories to determine their level of durability. The compression strength of an EPS product is measured in ten percent of its weight. This rating reflects its ability to withstand pressure during the process of insulation installation. It is also known for its moisture resistance. Its moisture content is very low, and it does not sustain mold growth. Its resilience and flexibility makes it an excellent material for insulating buildings.
Jablite EPS 70 board is a 100% recyclable insulating panel
The Jablite EPS 70 board is largely suitable for thermal insulation in ground-bearing concrete and suspended concrete ground-floors, timber framed walls, and external walls. This 100% recyclable insulating panel meets the requirements of Building Regulations Approved Documents, and can be easily recycled when no longer needed. It also offers a number of other benefits.
EPS is made from solid polystyrene beads that are blown together to create a foam-like substance. The foam has high thermal conductivity, is resistant to moisture, and is highly cushioning. It’s easy to install and extremely adaptable to a variety of applications. Jablite EPS is a 100% recyclable insulating panel with an excellent R-value.
The product is certified by BSI, a reputable testing laboratory. Its U-values are 0.032 W/mK for standard thicknesses. The same material can reduce this value to 0.28W/m2K or 0.30W/m2K when combined with graphite EPS. The benefits of using Jablite EPS 70 board are clear.
The Jablite EPS 70 board is largely recyclable and provides consistent thermal performance. It is highly resistant to moisture and bacteria, making it an ideal choice for domestic ground floor constructions. In addition, it is easily recyclable and CFC-free. A 100% recyclable insulating panel can be used in multiple applications, including buildings, offices, and even vehicles. However, its best uses are in residential applications.
A British Standard Institute-certified EPS board is the most eco-friendly insulating panel on the market. The British Standards Institute has awarded the Jablite EPS 70 board with certificates FM/01260 and EMS/559414. The certifications guarantee that the Jablite EPS 70 board is a 100% recyclable insulating panel. It also meets all the requirements of the National Building Regulations.
The Jablite EPS 70 board is largely 100% recyclable. Its thermal performance does not degrade with time, and it does not off-gas. The thermal conductivity stated on the Declaration of Performance certificate is the actual thermal conductivity of the product. Its rot and mould-proof, and water-resistant properties make it a great choice for building walls, floors, and ceilings.
Jablite Claymaster protects against clay heave
If you’re building a new home, Jablite Claymaster is an excellent way to protect the foundation against clay heave. This problem occurs when the soil expands and contracts due to water and a large proportion of mineral particles. These types of soils are extremely cohesive when wet and crumbly when dry. The expansion and contraction caused by heave can cause serious problems to a foundation and its surrounding structures, including buildings. Jablite Claymaster prevents clay heave by surrounding pile caps with granular material of up to 150mm thickness.
Jablite Claymaster is fully compliant with European building regulations and NHBC approval. This product is CE-marked, manufactured to BS EN 14933 and a BBA Certificate. It is flame retardant and is rated Euroclass E. Jablite Claymaster is also a fire-retardant material, and has achieved an A+ rating in the BRE Green Guide.
Claymaster is an EPS compressible fill material that prevents movement of soil moisture. When used as a subfloor under a slab pour, Claymaster reduces the pressure on ground beams and trench fills. It must be installed properly, according to BS 6203 and manufacturer’s instructions. Claymaster can be purchased online or from a Jablite dealer. It is also available in a variety of additional widths and lengths.
Jablite EPS 100 board is easy to cut and install
Made from EPS, Jablite EPS 100 board is lightweight, cost-efficient, and highly resistant to heat and cold. It is ideal for insulating various constructions and provides constant thermal performance at varying temperature conditions. The insulating material can be cut to size and can be installed without any special tools. Jablite products conform to BS EN 13163 ‘Thermal Insulation products for buildings’ specifications.
Made in the UK, Jablite EPS 70 board is suitable for external and internal walls. It is lightweight and easy to handle. It provides effective floor insulation and can also be used in walls. It meets the requirements of the Building Regulations. It is ideal for both new and existing constructions. Jablite EPS 70 board is also suitable for standard domestic loads. Jablite EPS70 has low thermal conductivity and high compressive strength. It provides excellent insulation and load-bearing capacity.
Jablite EPS products are compatible with all common building materials. These products are easy to cut and install. You can choose the size that suits the construction site and your budget. Jablite EPS 100 board is easy to cut and install. It’s lightweight, water resistant, and has outstanding strength to weight ratios. You can install them yourself or hire a professional to do it for you.
Jablite EPS 100 is versatile and suitable for a variety of applications. It’s easy to cut and install and comes with a Class E flame retardant additive. It’s non-toxic and biodegradable, so it is safe for the environment and can be easily disposed of in an approved waste site. You can easily install Jablite EPS 100 board yourself, making it an ideal choice for DIY enthusiasts.