Kingspan 25mm insulation is made with a rigid thermoset polyisocyanurate (PIR) core. Its low-emissivity foil facing provides excellent thermal performance. It is manufactured using Niflam technology and has a thermal conductivity of 0.022W/mK, which means that heat stays inside your home.
TP10 Kingspan insulation reduces energy bills
Installing Kingspan TP10 insulation can save up to a quarter of your energy costs. It features a rigid thermoset PIR core and is resistant to air infiltration. The foil facings also help to prevent moisture and condensation. This high performance insulation is made to last for years.
TP10 Kingspan insulation is available in a variety of thicknesses. You can use two pieces of TP10 to achieve the perfect thickness. It can also be overlapped to increase the insulation’s thickness. This insulating material has excellent thermal qualities and can easily be installed in a variety of buildings.
The Kingspan ThermaTM, Kooltherm and QuadCore are thermoset insulation products. Each is classified by the Euroclass System based on its thermal conductivity. Kingspan Thermapitch TP10 has a thermal conductivity of 0.022 W/mK. Kingspan Therma products can help reduce energy bills in homes. The products are also available in foam-based products.
Kingspan Thermaroof TR31 is a rigid thermoset PIR insulation board. It has a high-performance rigid PIR insulation core and is faced with a low-emissivity composite foil. This product is suitable for use over flat roofs, whether they are made of metal or plywood. It is compatible with most green roof systems and bitumen-based waterproofing systems.
TP10 Kingspan insulation reduces energy costs by reducing heat and cold radiation. The product is easy to install and can reduce energy bills by up to 50%. However, it is important to be aware that cutting insulation boards can produce harmful dust particles and debris. Hence, wearing protective gear is essential. A dust mask, gloves, and safety glasses should be worn. In addition, permanent marking can be used to indicate where to cut the board.
It is lightweight
Kingspan 25mm insulation board is a premium multi-purpose insulation board, designed to overcome thermal bridging. Its lightweight and versatile design make it ideal for use in a wide range of applications. Its foil grid means it is easy to cut and is especially suitable for use in lightweight steel frame buildings.
Kingspan 25mm insulation is highly resistant to moisture and fire, making it ideal for exterior and interior wall constructions. The lightweight and rigid polyisocyanurate fibre core resists microbial growth and the facings are non-food for vermin, making them suitable for exterior use. Kingspan 25mm insulation is extremely effective at preventing heat transfer between different rooms of a building.
Kingspan 25mm insulation is lightweight and can be used to insulate walls, ceilings and floors. Its low thermal conductivity makes it a good choice for new and refurbishment projects. Unlike other types of insulation, it does not contribute to ozone depletion and is very low in global warming potential. It is also durable and easy to handle, making it suitable for use in a wide range of applications.
Kingspan TP10 insulation boards can help reduce energy bills by up to 25%. It is a thermoset polyisocyanurate board with a thermal conductivity of 0.022 W/mK. Its lightweight construction means it is an ideal choice for DIY projects or professionals who work alone. Its non-deleteterious core also makes it easy to handle. These insulation boards are suitable for residential and commercial applications.
It is non-deleterious
Kingspan 25mm insulation is a durable and non-deleterious material. This product is suitable for a wide variety of roofing systems, including single ply, partially bonded built-up felt, mastic asphalt and cold-liquid applied waterproofing. It is also easy to handle and install.
Kingspan 25mm insulation is an excellent choice for new builds and refurbishments. It provides excellent thermal efficiency, despite its low thickness, and is highly recyclable. It is also resistant to moisture, solvents and mineral oils. It is the ideal choice for residential and commercial projects.
Kingspan 25mm insulation is non-déléterious and enables the use of thinner boards, without affecting the U-value. Its fibre-free, rigid thermoset phenolic core resists water vapour. It is suitable for use on inverted roofs, industrial buildings, hospitals and more.
Kingspan 25mm insulation is composed of a rigid thermoset PIR core. Because of its low thermal conductivity, it is non-deleterious and must be protected from moisture. Waterproof membranes should be used in conjunction with Kingspan 25mm insulation. Kingspan is one of the largest manufacturers of high-performance insulation materials in the UK. It is also committed to sustainability. Kingspan 25mm insulation has an excellent BES 6001 and Green Guide rating.
It is unaffected by condensation
Kingspan 25mm insulation is unaffected in cold climates and offers excellent thermal performance. Its vapour control layer is integral and increases the vapour resistance of wall linings. Vapour check plasterboards, such as Kingspan Kooltherm K118 Insulated Plasterboard, and polythene sheeting are also available. As a building designer, you should consider the requirements of BS / I.S. EN 62305:2011 when choosing wall lining.
Kingspan Thermapitch TP10 is designed for use on warm roofs with tiled or slated panels. Its low emissivity composite foil face is autohesively bonded to the insulation core during manufacture. Its unique, water-resistant, and easy-to-handle composition makes it a practical choice for new builds and refurbishments.
Kingspan 25mm insulation is also resistant to moisture. Its fibre-free core has an exceptional ability to resist microbial growth and resists odour and vapour. It is suited to both sealed and ventilated walls. The product is a cost-effective, sustainable and environmentally friendly choice.
Kingspan Kooltherm K112 offers premium performance. It is comprised of a CFC/HCFC-free rigid phenolic core with a low emissivity composite foil facing. Its thermal resistance is improved by the combination of low-emissivity foil and low-emissivity vapor-resistant layer on warm sides. It is completely safe to use.
It is fire resistant
Kingspan 25mm insulation is suitable for pitched roofs, and the company has a range of other options. They manufacture a range of products for different applications, including Celotex XR4000, TB4000 and GA4000, which are highly respected within the insulation industry. Although Kingspan is often considered the best option, it depends on the thickness, type of application and sizing requirements.
The fire resistance of Kingspan insulated panels is excellent, and its QuadCore range of fire-resistant insulators boasts a fire resistance rating of 15 to 120 minutes. Choosing the right product is important, and a little research can go a long way. You should also take into account the cost and the size of the panels.
Kingspan Thermapitch TP10 insulation board is ideal for pitched warm roof spaces, and contains a thermoset polyisocyanurate (PIR) core. Its thermal conductivity is only 0.022 W/mK, which is second only to phenolic insulation in thermal performance. Furthermore, Kingspan PIR insulation is highly resistant to water vapour passage, meaning it will not reduce the efficiency of the insulation.
Kingspan 25mm insulation has a fire resistance rating of A1, which means that it is suitable for home use. Kingspan Kooltherm K15 and QuadCore Technology have both undergone large-scale system tests. This means that if a fire occurs, they can self-extinguish when the flame is removed.
Kingspan ThermaWall TW55 is a 25mm thick insulated board with a PIR (polyisocyanurate) insulation core and composite aluminium foil facings. This is a high-performance rigid thermoset foam insulation board. ThermaWall TW55 also has low emissivity, making it ideal for timber frame wall constructions.