If you’re planning to lay plasterboard in your home, you should consider Knauf XPS plasterboard. This product is made of extruded polystyrene, which is CFC free. It also has a thermal conductivity of 0.033 W/mK, making it perfect for new build applications.
BS 8000 British Standard workmanship
Knauf XPS plasterboard is a versatile material that combines the advantages of plasterboard and extruded polystyrene board. Its high thermal conductivity of 0.033 W/mK limits heat loss through application. It is a low-maintenance material and can be used on existing properties. Its versatility also makes it easy to meet building regulations.
Moreover, it meets British Standard 8000 workmanship, a requirement in construction. This means that Knauf XPS plasterboard must be used in accordance with the British Standard. It also requires appropriate PPE kits for installation. In addition, it is protected by BBA Agreement Certificate No. 14//5157.
Good vapour resistance
Knauf XPS plasterboard combines the benefits of insulation and drylining. This product provides excellent vapour resistance at reduced thickness, which is important to comply with building regulations. Moreover, XPS is free from CFCs and HCFCs, meaning it is an environmentally friendly option. It can also be retrofitted in existing properties.
Compared to traditional plasterboards, Knauf XPS is made with a polystyrene insulator, which provides enhanced thermal resistance and vapour resistance. Knauf XPS plasterboard is CFC and HCFC-free.
This plasterboard is easy to spot, due to its green paper water repellent lining. This product can be used in ceilings, partitions, and semi-exposed areas. It is also highly aesthetic, thanks to its handy tapered edge. It is also suitable for skimming and jointing.
Knauf XPS insulating thermal laminate saves energy and maximises room space. It also satisfies Building Regulation requirements for walls and roofs, making it ideal for warm roof situations. Its R-value is 0.37 m2K/W, which makes it an ideal choice for drylining walls.
Good thermal performance
Knauf XPS plasterboard is an excellent choice for achieving good thermal performance. It combines the benefits of plasterboard and extruded polystyrene in one product. The product is made with CFC and HCFC free products and has a thermal conductivity of 0.033W/mK, which means it will restrict heat loss in the building. It is also suitable for use in existing buildings, and can be retrofitted easily.
Knauf XPS is ideal for internal wall insulation, as it combines the benefits of drylining and insulation. It is made from extruded polystyrene, which is highly water resistant, which means that water will not penetrate through the fabric. It is also a CFC-free alternative to traditional wallboard, reducing energy bills and CO2 emissions. Furthermore, it does not produce gases that can deplete the ozone layer.
Knauf XPS plasterboard combines high-quality polystyrene insulation with 9.5mm Knauf wallboard for excellent thermal performance. Moreover, it is suitable for masonry partition walls and counterwalls. Additionally, it is suitable for wall bonding with Knauf Perflix adhesive.
Knauf EPS Thermal Laminate Insulation is made of high-quality CFC-free expanded polystyrene and 9.5mm tapered edge plasterboard. It is an ideal choice for new build and refurbishment projects. It can help bring inefficient buildings up to modern standards. The products are easy to install and require minimal maintenance. Knauf EPS Thermal Laminates are also excellent for existing buildings and can help reduce carbon emissions and energy bills. They also offer quick payback periods.
XPS insulation boards can achieve thermal conductivity of 0.33 W/mK, which is significantly better than that of PIR. While PIR offers better thermal conductivity, its load-bearing capacity is significantly lower. A typical PIR insulation board offers a declared compressive strength of 120 kPa, while XPS products can reach up to 150 kPa.
CFC-free
Knauf XPS plasterboard is certified CFC-free and has an improved thermal resistance. It is made of a high-quality polystyrene insulator that is bonded to 9.5mm Knauf wallboard. Its thermal conductivity is very low and it is vapour-resistant.
Knauf XPS is an innovative hybrid between plasterboard and extruded polystyrene board. Its thermal conductivity is extremely low, at 0.033W/mK, which helps to limit heat loss through the application. This is the perfect solution for new build projects, as it reduces energy consumption and CO2 emissions. It can also be retrofitted into an existing property.