There are many types of duct wrap available. Whether you’re looking for Fiberglass duct wrap, EcoFoil duct wrap, or Fire-rated duct wrap, you can find it here. When choosing a duct wrap material, make sure to look for the label that specifies its vapor retardation rating. You can also choose from a variety of widths to match your ductwork. Listed below are a few pros and cons of each type.
Fiberglass duct wrap
The market for fiberglass duct wrap insulation is projected to grow at a CAGR of over 6% over the next five years. Growing demand for energy efficient solutions, coupled with the expansion of manufacturing facilities and government investments, will fuel market growth. In addition, the product’s moisture resistance and improved performance under wet conditions will further boost its growth. In addition to boosting the market growth, fiberglass duct wrap offers numerous benefits. Here are the top three reasons that will drive its future demand.
Fiberglass duct wrap insulation rolls are GREENGUARD certified and GREENGUARD GOLD certified. Fiberglass duct wrap insulation rolls contain a formaldehyde-free plant-based “binder” that gives them their distinctive shape and brown color. These factors contribute to the overall health risks and utility costs. So, when you choose the right insulation product for your home, consider the GREENGUARD certification.
This product also provides vapor resistance and a fire resistant outer jacket. This insulation is available in a 48 or 60-foot width and comes with a self-tapping tab for easy installation. This product can be installed inside sheet metal ductwork and reduce heat loss. This insulation has many benefits and helps increase indoor comfort. Moreover, it is also accepted as an alternative to a fire-rated shaft. You can purchase fiberglass duct wraps from leading suppliers.
Fiberglass ducts are made from 1-1/2 inch thick boards that are filled with resin-bonded inorganic glass fibers. They have reinforced aluminum/FSK laminate facings that serve as water vapor retardants and air barriers. Some fiberglass duct systems have mat-faced surfaces that are easily cleaned with industry-approved methods. However, they are also prone to mold growth. For these reasons, fiberglass ducts are best used by professionals.
EcoFoil
In addition to reducing radiant heat gain, EcoFoil R-8 HVAC Duct Wrap Insulation also helps control condensation. It creates an airtight thermal break around HVAC ducting. Its installation involves wrapping the insulation around the ducting in an airtight manner and sealing all seams. If you’re a homeowner, you can purchase EcoFoil R-8 Duct Wrap Insulation.
The material is easy to work with, and installation is a breeze. EcoFoil duct wraps and barriers are easy to apply; all you need are staple gun and scissors. By contrast, traditional insulation products require the use of safety masks and gloves. Also, reflective insulation is safer to use than traditional products, with a lower off-gassing percentage than traditional insulation. And, most importantly, it’s recyclable!
Despite being an effective radiant barrier, standard aluminum foil is not enough to prevent heat transfer. Standard aluminum foil is just a thin sheet of aluminum mixed with other alloys, and will oxidize over time. Moreover, the reflective foil EcoFoil offers is highly durable and corrosion-resistant. Compared to standard aluminum foil, it resists up to 96% of radiant heat transfer. This is significant considering that approximately 75% of total heat transfer through the roof occurs through radiant heat. Additionally, 93% of heat gained from the outdoors into the attic is due to radiant heat transfer. Traditional insulation products only prevent convective and conductive heat transfer, but not radiant heat transfer.
Although the energy savings offered by EcoFoil duct wrap is very high, you must be careful when installing it. The installers may have improperly installed it or overestimated the R-value. In this case, the installer must submit an evaluation report and make sure it meets all installation requirements. If there are any questions, the installer should submit the evaluation report along with the permit application. Likewise, the materials should be installed properly, according to the manufacturer’s installation instructions.
Quiet-Duct Wrap
The use of a sound-absorbing material to line the interior ductwork of your home or office is highly recommended. It is essential to choose high-quality products when lining HVAC ductwork. For example, Big Fish AC & Heating, LLC recommends melamine foam for its high sound absorption, thermal insulation, and low smoke and flammability properties. Also, Quiet-Duct Wrap is fire-retardant and foil-faced. This acoustical duct wrap is made from natural fibers and meets current standards and specifications.
Duct wrap comes in flexible and rigid forms. The selection of the type to use should be based on several factors, including whether the ducts are round, oval, or rectangular. It is important to choose the right material for the purpose, as some are better suited to indoor or outdoor installation than others. There are many types of duct wrap, including those designed for sound control and insulation R-value.
The Pipe & Duct Wrap Lag is another mass-loaded noise barrier. This wrap provides sound absorption around pipes and ductwork and prevents noise transmission through walls. This wrap also features a 2″ thick quilted fiberglass absorber that improves low-frequency acoustic performance. In addition to being a mass-loaded noise barrier, Quiet-Duct Wrap reduces radiated noise and improves air temperature efficiency.
Fire-rated duct wrap
3M Fire Barrier Duct Wrap 615+ is a thin, lightweight duct wrap that offers excellent insulating properties and is a space-saving alternative to conventional, bulky fire protection methods. These fire-resistant duct wraps are typically used in ventilation ducts and grease ducted in commercial kitchens. These duct wraps are made from a fire-resistant polyethylene film. For a more detailed explanation of its benefits, see the following article.
Fire-rated duct wrap is also available in a range of sizes to suit different duct systems. It is important to choose a suitable fire barrier based on the duct system’s complexity and function. The materials used in these products must meet AS4072.1 and UL/Intertek standards. It is also important to choose a duct wrap that is lightweight and easy to apply. Whether you’re using it for ventilation, heat exchange or grease ducts, the product must meet all flammability and fire protection codes.
To choose the right fire-rated duct wrap for your building, it’s important to know the mechanical code requirements for ducts. It’s important to note that the fire-rated duct wrap is made from a highly elastic material that conforms to the structure. Depending on its application, it will either seal the air duct or not. The fire-rated duct wrap should be recessed below the floor or wall surface. You can find more detailed information on the FyreWrap Elite 1.5 Duct Insulation system at the FyreWrap Product Resource Center.
Flexible fire-rated duct wrap has also been tested to meet the requirements for IBC (International Building Code). These systems are widely accepted, as they are tested, listed, and labeled. The flexibility of these fire-rated duct wraps makes them an excellent alternative to gypsum shaft enclosures. In addition to enhancing air quality in your building, fire-rated duct wrap can also protect your ducts in a fire emergency.
The primary purpose of fire-rated ductwork is to deliver and remove warm air and cool air to keep the occupants comfortable. However, ductwork can also provide a pathway for fire. Fire-rated ductwork can improve the safe operation of HVAC systems by reducing the possibility of a fire spreading through it. Its effective fire-resistant insulation works as a barrier between ducts and slows the passage of smoke and flames. Fire-rated duct wrap also improves energy efficiency. This reduces the need for energy, which leads to financial savings.