EPS 100 insulation is a highly resistant material, made from expanded polystyrene. It is an excellent thermal insulator and is also hydrophobic. It is used for thermal insulation of floors and foundations below the ground. This material is available in a variety of different types, depending on the application.
X-Clad
X-Clad EPS100 insulation provides a high-quality, affordable roofing solution. It is available in both flat and angled roof profiles and provides consistent, leak-proof insulation. Moreover, it is produced with a locking tongue and groove profile, which prevents the insulation from shifting and causing leaks. The panels are available in thicknesses from 85 to 200 mm.
EPS100 insulation is certified to meet or exceed current building energy codes. Its low thermal conductivity (U-Value) of 0.035W/mK makes it a highly effective insulator. Further, X-Clad polyfoam does not contain CFCs or HCFCs, which have negative global warming and ozone depletion effects.
EPS100 floor insulation can be used in many construction projects. Its lightweight and easy installation makes it a popular choice among contractors and builders. This material meets current U-value requirements and is suitable for both commercial and residential applications. Its compressive strength and thermal performance are exceptional.
V-Clad
The V-Clad brand of external wall insulation is a great choice for reducing the cost of heating your home. It’s made of extruded polystyrene, which is a very good insulator. The panels can be ordered in thicknesses up to 100mm.
EPS insulation comes in various shapes, including blocks and foam. These are formed using hot wires and a molding process. Some types of EPS are also available with plastic film faces that increase the rigidity and reflectivity. Installation guides are also available. Some manufacturers offer both EPS and GPS insulation.
Expanded polystyrene insulation is a popular choice for a range of applications. Its advantages include lightweight construction and a variety of densities. It is ideal for use in cavity walls and can easily meet low energy building standards. It’s available in various densities and can be cut to fit your home’s specific measurements.
V-Clad EPS 100 insulation is a high-quality product that is suitable for many applications. It has an R-value of 0.036 W/mK. This makes it an excellent choice for most insulation needs. If you’re looking for high-performance EPS insulation, Atlas Molded Products has a variety of different products to meet your needs. Contact a representative for more information or to discuss a project.
XPS is a high-performance insulation with an excellent thermal conductivity rating. It is ideal for many types of applications and is also suitable for zero fall roof designs. Unlike EPS, XPS has a higher r-value, which makes it more suitable for use in wetter environments.
S and B
EPS100 insulation is a closed cell insulation material with a high thermal performance. It is lightweight, easy to install and maintains its thermal efficiency throughout the life of the building. It is available in a wide range of thicknesses, is non-irritating and moisture resistant.
EPS 100 is available in three different types. The S and B varieties have the highest thermal resistance. S-class EPS is made of expanded polystyrene that is hydrophobic, making it suitable for use in places that have high moisture levels. These types are ideal for exterior thermal insulation.
Energy-efficient buildings must meet certain standards in order to be classified as “A++”. This class requires a thick thermal insulation layer to prevent heat from escaping. The thickness of this layer is measured in centimeters. In Lithuania, it varies by about 5 cm between the coldest and warmest regions. It is possible to calculate the payback period using the simple payback method. In this method, the amount of money spent during the payback period does not change. For buildings classified “A++” or “A+”, the payback period is about five years.
Hydrophobic
Eps100 is an insulating material that is water-resistant and lightweight. It is also very versatile and can be used in many different applications. However, it is not suitable for EWI systems and is not suitable for conditions where flame retardants or flammable materials are present. For these reasons, you should be careful about the applications of Eps100 insulation.
In a recent study, Energy Materials Testing Laboratories proved that EPS does not absorb moisture, even when exposed to long periods of cold weather. In addition, the material retains 95 to 97 percent of its thermal efficiency, even in wet conditions. The water repellent properties of EPS make it an ideal choice for climate-controlled environments where humidity and evaporation can cause mold growth. Moreover, it supports the building envelope, thus ensuring a comfortable and energy-efficient environment.
EPS 100-037 is made of hydrophobic polystyrene. This means that it is suitable for areas that experience moisture. In addition to its excellent thermal insulation, it does not absorb water easily and can be sprinkled on the ground without additional protection. It is also hydro-resistant, making it a good choice for industrial applications.
EPS is used extensively in the construction industry. Its properties include fire resistance, mechanical strength, and chemical resistance. In addition, it has an extremely low fire spread rate. This means that it can be used in conjunction with other materials in the construction industry. If you choose to use it as an insulation material, it will help protect against fire.
EPS100 insulation is a good choice for many applications. In particular, it is ideal for interior and exterior walls. It can provide better thermal insulation than conventional EPS. Moreover, it can be used as a filling material in gypsum plaster. In addition, it is resistant to chemicals and microorganisms.